Filter
Top Products
55
&Zn=x Store Telephone Number
This command is used to store up to four dialing strings in the modem’s nonvolatile
memory for later dialing. The format for the command is &Zn = ”stored number”
where n is the location 0?3 to which the number should be written. The dial string
may contain up to 40 characters. The ATDS = n command dials using the string
stored in location n.
Result Codes:
KO3,2,1,0=n
RORREesiwrehtO
\An Select Maximum MNP Block Size
The modem will operate an MNP error corrected link using a maximum block size
controlled by the parameter supplied.
dnammoCtceffE
OA\sretcarahc46
1A\sretcarahc821
2A\sretcarahc291
3A\)tluafeD(sretcarahc652
Result Codes:
KO3,2,1,0=n
RORREesiwrehtO
\Bn Transmit Break to Remote
In non-error correction mode, the modem will transmit a break signal to the remote
modem with a length in multiples of 100ms according to parameter specified. The
command works in conjunction with the \K command.
dnammoCtceffE
9B\-1B\
rorre-noN().3=tluafeD(.stinusm001nihtgnelkaerB
).ylnoedomdetcerroc
Result Codes:
KO.edommedomatadnidetcennocfI
REIRRACON.edommedomxafnidetcennocrodetcennoctonfI