Filter
Top Products
10
3 Installing the Modem
11
The Modem comes with its own dedicated phone cable. This cable has a standard
RJ-11 connector on one end for the phone line, and a special connector that ts
into the Modem on the other end. Insert the cable into the Modem, as shown in
the gure, below.
M
Caution: Be careful not to push the computer against
anything when the cable is in place. This may bend the
connector and damage the pins. Keep the area around the com-
puter clear, so the computer can move freely without damaging the
cable or connector.
Next, go to chapter 4, “Installing the Driver Software,” to load the software used
by the Modem onto the computer.