Filter
Top Products
22
4 Installing the Driver Software
23
DataLink V.90 PCMCIA Fax Modem
9. When prompted to select the the manufacturer and model of the Modem,
click OK, then Next in the following window. The driver software
is installed.
Note: To verify Windows has found the Modem, select
Start, Settings, Control Panel, then Modems.
If dialing into a Windows NT Remote Access Server, or connecting to the
Internet, Dial-Up Networking must be congured properly. See the Windows NT.
documentation for details.
Next, go to chapter 5, “Installing the Communications Software.”
Windows 2000
To load the Modem’s software drivers onto a computer running Windows 2000:
1. Insert the Modem into the computer’s PCMCIA slot.
2. Turn on the computer.
3. A “Found New Hardware” window appears, stating that Windows has
found a “Standard PCMCIA Card Modem.”
4. Right-click My Computer, then select Properties from the pop-up menu.
5. In the “System Properties” window, select Hardware, then Device Manager.
6. When the “Device Manager” window appears, expand the “Modems”
section by clicking on the plus sign (“+”).