Filter
Top Products
12
4 Installing the Driver Software
13
DataLink V.90 PCMCIA Fax Modem
Windows 95 OSR2
To load the Modem’s software drivers onto a computer running Windows 95 OSR2:
1. Turn on the computer.
2. Insert the Modem into the computer’s PCMCIA slot.
3. Windows detects the Modem, and the rst “Update Device Driver Wizard”
window appears. Insert the DataLink Installation CD in the computer’s
CD-ROM drive and click Next.
4. Another “Update Device Driver” window appears. After Windows has
found the driver software for the Modem, click the Finish button.
5. If Windows asks for an installation disk, click OK, then Other Locations. Select
the CD-ROM drive and click OK again. The driver software is installed.