Filter
Top Products
6
2 Before You Begin
7
DataLink V.90 PCMCIA Fax Modem
Windows NT 4.0
To ensure the computer is congured to use the Modem, the PCMCIA and COM
2 settings must be properly congured.
PCMCIA Settings
1. After booting up the computer, select Start, Settings, then Control Panel.
2. In the “Control Panel” window, double-click Devices.
3. The “Devices” window appears. In the list box, scroll down and click Pcmcia
once to highlight. If the PCMCIA device is set correctly, “Started” and
“Boot” should appear in the “Status” and “Startup”columns, respectively.
4. If the PCMCIA device is not set to Boot and Started, click Startup, select
Boot in the “Device” window, then click OK.
5. Close the “Devices” window and restart the computer.