Filter
Top Products
17
Configuring the Adaptec SCSI Card 39160 with SCSISelect
SCSI Device Configuration:
Sync Transfer Rate (MBytes/sec) 160, 80.0, 53.4, 40.0,
32.0, 26.8, 20.0,
16.0, 13.4, 10.0,
ASYN
160
Initiate Wide Negotiation Yes, No Yes (Enabled)
Enable Disconnection Yes, No Yes (Enabled)
Send Start Unit Command Yes, No Yes (Enabled)
Enable Write Back Cache
2
Yes, No,
N/C (No Change)
N/C (No
Change)
BIOS Multiple LUN Support
2
Yes, No No (Disabled)
Include in BIOS Scan
2
Yes, No Yes (Enabled)
Advanced Configuration Options:
Reset SCSI Bus at IC Initialization Enabled, Disabled Enabled
Display <Ctrl> <A> Messages during
BIOS Initialization
[Auto-sync]
Enabled, Disabled Enabled
Extended BIOS Translation for
DOS Drives > 1 GByte
Enabled, Disabled Enabled
Verbose/Silent Mode [Auto-sync] Verbose, Silent Verbose
Host Adapter BIOS [Auto-sync] Enabled
Disabled: Scan
Bus
Disabled: Not Scan
Enabled
Domain Validation
2
[Auto-sync] Enabled, Disabled Enabled
Support Removable Disks Under BIOS
as Fixed Disks
2
Disabled,
Boot Only,
All Disks
Disabled
BIOS Support for Bootable CD-ROM
2
Enabled, Disabled Enabled
BIOS Support for Int 13 Extensions
2
Enabled, Disabled Enabled
1
Setting is valid only if Multiple LUN Support is enabled.
2
Settings are valid only if host adapter BIOS is enabled.
SCSI
Select
Options Available Settings Default Setting