Filter
Top Products
21
Configuring the Adaptec SCSI Card 39160 with SCSISelect
■
BIOS Multiple LUN Support
—(Default:
No
) Leave this set-
ting at
No
if the device does not have multiple Logical Unit
Numbers (LUNs). When set to
Yes
, the SCSI card BIOS pro-
vides boot support for a SCSI device with multiple LUNs (for
example, a CD “juke box” device in which multiple CDs can be
accessed simultaneously).
■
Include in BIOS Scan
—(Default:
Yes
) When set to
Yes
, the
SCSI card BIOS includes the device as part of its BIOS scan at
bootup.
Advanced Configuration Options
Note:
Do not
change the Advanced Configuration Options
unless absolutely necessary.
■
Reset SCSI Bus at IC Initialization
—(Default:
Enabled
) When
set to
Enabled
, the SCSI card generates a SCSI bus reset during
its power-on initialization and after a hard reset.
■
Display <Ctrl> <A> Messages during BIOS Initialization
—
(Default:
Enabled
) When set to
Enabled
, the SCSI card BIOS
displays the Press <Ctrl> <A> for SCSISelect (TM) Utility! mes-
sage on your screen during system bootup. If this setting is dis-
abled, you can still invoke the SCSI
Select
Utility by pressing
<Ctrl> <A>
after the SCSI card BIOS banner appears. If you
change this setting, the change automatically applies to both
SCSI channels.
■
Extended BIOS Translation for DOS Drives > 1 GByte
—
(Default:
Enabled
) When set to
Enabled
, provides an extended
translation scheme for SCSI hard disks with capacities greater
than 1 GByte. This setting is necessary only for MS-DOS 5.0 or
above; it is not required for other operating systems, such as
NetWare or UNIX.
Caution:
Changing the translation scheme destroys all
data on the drive. Be sure to back up your disk drives
before changing the translation scheme.