Filter
Top Products
24
Adaptec SCSI Card 39160 User’s Reference
Using SCSI Disk Utilities
To access the SCSI disk utilities, follow these steps:
1
Select the
SCSI Disk Utilities
option from the menu that
appears after starting SCSI
Select
. SCSI
Select
scans the SCSI bus
(to determine the devices installed) and displays a list of all
SCSI IDs and the devices assigned to each ID.
2
Use the
↑
and
↓
keys to move the cursor to a specific ID and
device, then press
Enter
.
3
A small menu appears, displaying the options Format Disk
and Verify Disk Media.
■
Format Disk
—Allows you to perform a low-level format
on a hard disk drive.
Most SCSI disk devices are preformatted
at the factory and do not need to be formatted again
.
Caution:
A low-level format destroys all data on the
drive. Be sure to back up your data before performing
this operation. You
cannot
abort a low-level format
once it is started.
■
Verify Disk Media
—Allows you to scan the media of a
hard disk drive for defects. If the utility finds bad blocks on
the media, it prompts you to reassign them; if you select
yes
, those blocks are no longer used. You can press
Esc
at
any time to abort the utility.