Adaptec 5ANA-940 Network Card User Manual


 
A-6
ANA-5910/5930/5940 User’s Guide
UTP and STP Interface (ANA-5910/5930)
Pin contacts are listed here for the STP, UTP-3, UTP-4, and UTP-5
cables
:
1
If your ATM switch is ATM Forum pinout compliant, create a cable to convert to the
pinouts; see Figure on page A-7.
Connector RJ-45 shielded style interface
Oper. Distance 100 meters
ANA-5910 cable EIA/TIA UTP-3, 4, 5: 100 ohm
STP type 1, 1A, 2, 2A: 150 ohm
Data rate: 25.6 Mbits/sec
Line code: NRZI
ANA-5930 cable UTP-5: 100 ohm
Data rate: 155.52 Mbits/sec
Line code: NRZ
ANA-5910
1
/
IBM Defacto Pinout Standard
Pin Contact
ANA-5930/
ATM Forum Pinout Standard
AT M
Workstation/
ANA-5910
Signal
AT M
Network/
Switch Signal
AT M
Workstation/
ANA-5930
Signal
ATM
Network/
Switch Signal
Unused Unused 1 Transmit A Receive A
Unused Unused 2 Transmit B Receive B
Transmit A Receive A 3 Unused Unused
Receive A Transmit A 4 Unused Unused
Receive B Transmit B 5 Unused Unused
Transmit B Receive B 6 Unused Unused
Unused Unused 7 Receive A Transmit A
Unused Unused 8 Receive B Transmit B