Filter
Top Products
Configuring Bridge Parameters
30 Megabit Modem 310F and 320F User Manual
5 To add a static MAC address to the Bridge Address Table:
a Type to select
Create Static MAC Address Entry.
The message displays: Please enter MAC Address
(aa:bb:cc:dd:ee:ff)
b Type the MAC address, then press .
c Type to update the data in the current bucket, or type to Display All
Static MAC Address Entries.
6 To delete a static MAC address from the Bridge Address Table:
a Type to select
Delete Static MAC Address Entry.
The message displays: Please enter MAC Address
(aa:bb:cc:dd:ee:ff)
b Type the MAC address, then press .
The MAC address you just deleted displays:
MAC address = aa:bb:cc:dd:ee:ff
c Type to update the data in the current bucket, or type to Display All
Static MAC Address Entries.
7 To view all Bridge Address Table static MAC entries:
a Type to select
Display All Static MAC Entries.
The message displays: Searching Database
Eight entries, that result from the search, display. The bucket number indicates the
last bucket searched.
The message displays: Press C to Continue Searching
b Type to display the next eight entries of the search.
When no more entries are found in the database, the message displays:
Search Finished
Resetting the Bridge
Use the Bridge Reset option to reset the modem bridge function. Under rare conditions, the
bridge function may stop forwarding frames. If the DSL link is up and no errored seconds are
accumulating, but Ethernet data is not passing through the modem, a bridge reset on either the
ATU-C or ATU-R unit may resolve the problem.
4
ENTER
U 6
5
ENTER
U 6
6
C