ADC D3LXC-FCA100 Network Card User Manual


 
LTPS-UM-8013-03 Remote Configuration
D3LX CO and RMT Modules August 30, 2002 33
REMOTE CONFIGURATION
Use the D3RCAM craft interface system menu to view or edit the configuration for each D3LX RMT module in
the chassis. This menu can also be used to equip, provision, assign thresholds, and assign service state. The
D3RCAM Configuration menu is shown in Figure 22 on page 34.
1 Connect a maintenance terminal to the craft port on the D3RCAM front panel. Logon to the craft interface
system as described in “Connecting a Maintenance Terminal to the D3RCAM Craft Port” on page 20.
The Main Menu appears, as shown in Figure 20. If the Main Menu does not appear, check the terminal
communication parameters (or computer software interface) and retry this procedure.
Figure 20. D3RCAM Craft Interface Main Menu