Filter
Top Products
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Press ENT to enter the following screen. Use the Up and Down bu
ttons to conrm reset to factory
defaults.
Load Default
Cong? Yes
Load Default
Ok
If Load Default OK, this will be displayed on the LCD
as shown below.
Load Default
Press ESC to return to the main menu then use the
ENT button to select. This function resets all
settings to their factory default. This function helps th
e system recover from errors caused by an
illegal operation.
11-07.Adv Setup
Load Default
Burn In
This function is used to burn test the system reliability.
11-09. Adv Setup
Burn In
Press ENT to enter the following screen.
Burn In Mode
Copy & Compare
Use the Up and Down buttons to choose Compare, Async
Copy & Cmp and Async Compare, then
press ENT to conrm.
Copy HPA
If this function is set to "ON", the system will complete
ly copy the data in a source HDD's host
protected area.
11-08. Adv Setup
Copy HPA
The default is "OFF". Use the ENT , Up and Down buttons to change this to "On".