Filter
Top Products
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
6. ReScan BUS
ReScan Bus
Choose option 6 from the menu:
Press ENT to re-scan hardware. The LCD will display the follo
wing info.
Re-Scan BUS NOW?
Yes
When the scan is complete the LCD will display the fol lowing info.
Bus re- scan OK!
7. Source Size
Source Size
Source Size is used to show the capacity of the source.
Choose option 7 from the menu:
Press ENT and the LCD will show the following info.
HDD:Hitachi
Size:232.9GB
Then press ENT and the LCD will show the data's size info.
HDD:Hitachi
Data:200.9GB
8. Secure Erase
Secure Erase
Secure Erase is used to wipe the data of the hard disk, i
t will erase all of HDD of duplicator
(included Source HDD).
Choose option 8 from the menu:
Press ENT to access option. By default it is set to No. Use the Up
and Down arrow keys to choose
Yes.
Wipe all data.
Continue? No
Press ENT and the LCD will show the following info.
ReScan Bus allows swapping the source or target in and out without having to
reboot the system.