Filter
Top Products
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Copy HDD
Copy HDD copies data directly from the source hard disk to
the target hard disk. Please make
sure that the capacity of the target hard disk is equal o
r larger than the source hard disk.
Choose option 1 from the menu:
Press ENT to begin copy. The system will auto-detect the hard di
sks and show the following
copying info on the LCD.
The LCD will show the following info during the copyin
g process: elapsed time, completed
percentage. The copy speed, capacity and time will vary
depending on the source hard disk. Once
the copying process is complete the LCD will display t
he following results.
Copy-36MB/s 0%
232.9GB 00:00:00
Copy HDD
OK: 11 Fail: 0
1. Copy HDD
HDD:11 232.9GB
Async Copy HDD
This option is used to specify the size of the source for simplifying further copying operations.
Choose option 2 from the menu:
2. Async Copy HDD
HDD:10 232.9GB
Press ENT . Before the start of the reproduction, if the console detects that a hard drive
capacity is less than source, then the LCD will show the cor
responding channel number.
8
Space Not Enough
And then automatically copies. The LCD will display t
he following info.
Acpy-36MB/s 0%
232.9GB 00:00:00
If the replication process to continue to add additi
onal hard disk device, LCD will only show the last
completed percentage.
Once the copying process is complete the LCD will disp
lay the following results.
Async Copy HDD
OK: 11 Fail: 0
Compare
Compare HDD is used to see if the data on a source ha
rd disk is identical to the target hard disk
after the Copy HD operation.
Choose option 3 from the menu: