Filter
Top Products
Configuration
5-5
Discard: Packet is blocked and discarded.
Pass to next filter: Packet goes to the next filter in sequence.
When you are finished, click OK. If you do not want to create an bridge packet
filter, click Cancel to close the Add New Bridge Packet Filter window.
Modify Bridge Packet Filter
If you want to change the parameters of an bridge packet filter, select the filter
number, and then click Modify. This will open the Modify Bridge Packet Filter
window. You can change any of the parameters or settings. When you are
finished, click OK. If you do not want to modify this filter, click Cancel to close
the Modify Bridge Packet Filter window.
Remove Bridge Packet Filter
To delete a filter, select the filter number, and then click Remove. Click Yes to
remove the selected filter or click No to keep it.
Once you have finished setting these parameters, click Apply to review the
parameters you have entered and then click Finish to send settings to the
NetDSL. Click Exit to return to the NetDSL Manager.