ADS Technologies version 5.2b1 Network Card User Manual


 
Hardware Installation
2-3
2.2 Safety First
Personal Safety
In case of emergency, locate the closest electricity power-off switch.
Refrain from touching any active wires or terminals.
Remove jewelry before working on equipment connected to
electricity.
Keep cables away from walkways.
Dispose of this product in accordance with national laws and
regulations.
Product Handling
Keep ventilation slots clear.
Operate in a clean and dust-free location.
Cables must be attached to the correct interfaces; to do otherwise may
result in damaging the modem or produce hazardous voltage.
Do not operate or store the product in an environment that surpasses
temperature or humidity specifications.
2.3 Setup Instructions
Step 1. Choose a location for the NetDSL close to a power outlet and a
telephone line outlet. Preferably select a convenient location that does
not experience too much foot traffic and is away from sunlight.
Step 2. Choose a level surface for the NetDSL – such as a desk top, shelf, or
table.
Step 3. Place the NetDSL on the predetermined surface, so you can see the back
panel.