Filter
Top Products
Chapter 3. Configuration
3-2 MX2800 STS-1 User Manual 61200659L1-1
Figure 3-2. Configuration Menu Tree
Line Length
STS-1 Configuration Timing
XCV Threshold
Network Interface VT Mode Active Controller
Protection Configuration Network Protection
Max Switch Threshold
Miscellaneous Loopback Timeout Min Switching Period
External Clock Configuration PRI Ext. Clock
VT/Port Mapping> First
T1 State Last
VT Interface #1-28 T1 Coding State
T1 Remote Loopbacks Line Coding
T1 Circuit Protection T1 Line Length
Hairpin Loopback Circuit Protection
Line ID Loopback Detection
VT Interface Set Multiple Apply State
Set Cross-Connect Mapping Apply Line Length
Restore VT Mapping Defaults Apply Circuit Protection
Protection Threshold Apply Loopback Protection
XCV Threshold Local IP Address Apply All
Gateway IP Address
Subnet Mask
Management Port Trap IP Address
Dial-up Options Trap Generation
MGMT Options TL1 Setup Read Community Name
System SNMP MGMT Options Write Community Name
Management Trap Community Name
Password
Terminal Timeout Alarm Relay Configuration
System Security IP Security Equipment Identification
Date & Time IP Hosts Syslog Setup
Miscellaneous Save on Logout
Craft baud rate
Load Default Settings Update via XMODEM
Utilities Update FLASH Software Update via TFTP Server Server ID
Config Transfer Server Filename
Load and Use
System Reset Immediate Save Config Remotely
Save Configuration Scheduled Reset Time