Filter
Top Products
Chapter 3. Configuration
61200659L1-1 MX2800 STS-1 User Manual 3-15
Figure 3-10. Dialup Options Menu
Primary and Secondary Phone Numbers
When the MX2800 STS-1 dials out to send a trap, it first dials the
P
RIMARY
P
HONE
N
UMBER
. If the call is unsuccessful, it tries the
S
ECONDARY
P
HONE
N
UMBER
. Attempts between the two numbers
continue until a call is established and the trap is reported (or until
each number’s maximum for redial attempts is reached; see
Maximum Redial Attempts below).
Initializing String
The AT command entered in this field is used to initialize the
modem. Normally, this field should be left at the default setting
(ATZ).
Dial String
The AT command entered in this field causes the modem to dial
out. Normally, this field should be left at the default setting
(ATDT).
Maximum Redial Attempts
The MX2800 STS-1 attempts to establish a call the number of times
entered in this field. If a successful call is not established after the
final attempt, the MX2800 STS-1 discards the trap messages.