Filter
Top Products
61200214L1-1 IQ Probe User Manual 71
Chapter 10. Statistics
To configure the interval time frame, go to the System Configu-
ration menu under History Interval Size and select the time you
want the history interval to be set for (from 5 to 30 minutes, in
five minute intervals). The IQ Probe gathers and displays the
information according to the time selected.
The IQ Probe cuts the first gathering session short in order to begin
falling on the selected time boundary. For example: If the unit or the
statistics information was last reset at 12:03 and the History Interval is
set for five minutes, then the first interval session will last only two
minutes. Therefore, the first interval column (i.e., the column farthest
to the right if no columns have been deleted yet) normally represents a
time shorter than the other columns.
View by Day
This view provides historical information for the last seven days
(not including the current day). The most recent information is
displayed on the left.
The first day's column (i.e., the column furthest to the right) does not
represent a full day's worth of information (unless the unit or the
statistics information was reset at exactly 12 AM).