ADTRAN ADT-1234POE Switch User Manual


 
NetVanta 1000/1000R Series Hardware Installation Guide Option Modules
61200500L1-34N Copyright © 2008 ADTRAN, Inc. 35
4. OPTION MODULES
The NetVanta 1224STR, 1224R, and 1335 support several option modules designed to meet a variety of
networking requirements. The option modules include plug-in NIMs and plug-on DIMs.
NIMs are cards that plug directly into the option module slot located on the rear of the base unit. These cards
provide the following types of interfaces:
NetVanta 56K/64K NIM (P/N 1200861L1) on page 36
NetVanta T1/FT1 NIM (P/N 1202862L1) on page 37
NetVanta T1/FT1 NEBS NIM (P/N 1200862L2#NEBS) on page 38
NetVanta T1/FT1 + DSX-1 NIM (P/N 1202863L1) on page 39
NetVanta Dual T1 NIM (P/N 1200872L1) on page 40
NetVanta E1/FE1 NIM (P/N 1200868E1/L1) on page 41
NetVanta E1/FE1 + G.703 Drop NIM (P/N 1200878E1/L1) on page 42
NetVanta Serial NIM (P/N 1200866E1) on page 43
NetVanta SHDSL NIM, Annex A (P/N 1200936E1) on page 44
NetVanta SHDSL NIM, Annex B (P/N 1200937E1) on page 45
NetVanta ADSL NIM, Annex A (P/N 1202869E1) on page 46
NetVanta ADSL NIM, Annex B (P/N 1202889E1) on page 47
NetVanta 3G CDMA NIM (P/N 1700801G1) on page 48
DIMs are plug-on cards that plug directly on to the NIM prior to installation into the base unit. A DIM must be
plugged on to a NIM in order for the interfaces on the NIM to be active. The NetVanta supports the following
DIMs:
NetVanta Analog Modem DIM (P/N 1200864L1) on page 50
NetVanta ISDN BRI DIM (P/N 1200865L1) on page 51
NetVanta ISDN S/T DIM (P/N 1200875L1) on page 52
This section describes each module, providing individual card specifications and features. Refer to Connector
Pin Definitions on page 67 for pinout information. Installing Dial Backup and Network Interface Modules on
page 57 provides information on card installation.