ADTRAN ADT-1234POE Switch User Manual


 
NetVanta 1000/1000R Series Hardware Installation Guide Option Modules
61200500L1-34N Copyright © 2008 ADTRAN, Inc. 45
NetVanta SHDSL NIM, Annex B (P/N 1200937E1)
The NetVanta SHDSL NIM, Annex B (shown in Figure 32) provides a WAN SHDSL interface for the
NetVanta. See Table A-10 on page 70 for the SHDSL connector pinouts.
Figure 32. NetVanta SHDSL NIM, Annex B
WAN-SHDSL
ANNEX B
Features and Specifications
Operating Mode
Line termination (CO)
Network termination (CPE)
SHDSL Interface
Supported Standards: ITU-T G.991.2
SHDSL, Annex B
M-pair bonding of 2 pairs - ITU.T
G.991.2
Line Rate (2-wire mode): 192 to
2304 kbps in 64k increments
Line Rate (4-wire mode): 384 to
4608 kbps in 128k increments
Payload: ATM (AAL5)
Line Code: TC-PAM
Connector: RJ-45
Clock Source
CPE Operating Mode: Network
CO Operating Mode: Internal
Diagnostics
Network loopbacks (local and remote)
Alarm generation and detection
Programmable alarm threshold setting for
loop attenuation and signal-to-noise ratio
Compliance
EMC - see Electromagnetic
Compatibility (EMC) Table on page 6.
•AS/ACIF S043
EN 60950
AS/NZS 60950
RoHS compliant (Telecommunications
exemption)
Environmental
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Relative Humidity: Up to 95 percent,
noncondensing
Physical
Dimensions: 2.75-inch W x 4.25-inch D