ADTRAN ADT-1234POE Switch User Manual


 
NetVanta 1000/1000R Series Hardware Installation Guide Option Modules
61200500L1-34N Copyright © 2008 ADTRAN, Inc. 41
NetVanta E1/FE1 NIM (P/N 1200868E1/L1)
The NetVanta E1/FE1 module (see Figure 28) provides a WAN-E1 interface for the NetVanta meeting the
requirements of ITU-T G.703/G.704. The module provides a single 2.048 Mbps network interface. See
Table A-7 on page 69 for the pinouts. See page 73 for the DBU connector pinouts. An optional DIM is required
for dial backup applications.
Figure 28. NetVanta E1/FE1 NIM
WAN-E1 DBU
Features and Specifications
Operating Modes
Frame Relay, Multilink Frame Relay
PPP, Multilink PPP
HDLC
WAN-E1 Interface
Supported Standards: ITU G.703,
ITU-T G.704 (CRC-4), ITU-T G.823,
ITU-T G.797
Line Rate: 2.048 Mbps +
50 PPM
Line Code: AMI or HDB3
Framing: FAS with optional CRC-4
FE1 Line Rate: Channelized timeslot (in
multiples of 64 kbps)
Receiver Sensitivity: -30 dB
Connector: RJ-48C
Clock Source
•Network
•Internal
Diagnostics
Test Pattern Generation and Detection:
QRSS, 511, all ones, all zeros
Network loopbacks
Network performance data (15 minutes and
24 hours)
Alarm generation and detection
Compliance
EMC - see Electromagnetic Compatibility
(EMC) Table on page 6.
•AS/ACIF S016
ETSI TBR 12/TBR 13
EN 60950
IEC 60950
AS/NZS 60950
RoHS Compliant (Telecommunications
exemption)
Environmental
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Relative Humidity: Up to 95 percent,
noncondensing
Physical
Dimensions: 2.75-inch W x 4.25-inch D