Filter
Top Products
61202192L1-1 Express L768/L1.5 User Manual 89
Appendix A
Loop Status Messages
The Express L768/L1.5 displays current loop status of the HDSL on the bottom
center line of the terminal screen. The following messages are defined:
Connected
This is seen when the Express L768/L1.5 HDSL layer 1 is up. The rate is de-
termined by what it is configured for under Configuration/WAN/HDSL/Rate.
Echo: Tx: X Rx: Y
The current transmit and receive count for the PPP echo request test.
Layer 1 up
The Express L768/L1.5’s HDSL layer 1 is up.
Link down
The HDSL link is not synchronized.
Link In Sync
The HDSL link is synchronized but layer 1 is not up.
NET EOC LOOPBACK
Express L768/L1.5 has received an HDSL EOC loopback command from the
far end.
RINGING
An incoming call is ringing.
Rate Status Messages
Displays the rate at which the connection has been established.