Filter
Top Products
Chapter 3: Terminal Menu Operation and Structure
46 Express L768/L1.5 User Manual 61202192L1-1
Filter Defines /IP Filter Defines
Write security: 2; Read security: 3
The IP filter defines apply to any IP packet, whether it is routed or bridged. Up
to 32 IP defines can be specified.
Name Identifies the filter entry
IP Src IP address compared to the source address.
(dotted decimal format)
Src Mask Bits which are used in the source comparison.
(dotted decimal format)
IP Dest IP address compared to the destination address.
(dotted decimal format)
Dest Mask Bits which are used in the destination
comparison. (dotted decimal format)
Src Port IP source port number used for comparison
Range: 0 to 65535. (decimal format)
Src Port Cmpr Type of comparison that is performed
= - means ports equal to
not = - means port not equal to
> - means port greater than
< - means port less than
None - means the source port is not compared
Dst Port IP destination port number used for
comparison Range: 0 to 65535. (decimal format)
Dst Port Cmpr Type of comparison that is performed
= - means ports equal to
not = - means port not equal to
> - means port greater than
< - means port less than
None - means the destination port is not
compared
Proto Protocol used for comparison. Range: 0 to 255.
(decimal format)
Proto Cmpr Type of comparison that is performed
= - means protocols equal to
not = - means protocols not equal to
> - means protocols greater than
< - means protocols less than
None - means the protocol is not compared
TCP Est Yes - only when TCP established
No - only when TCP not established
Ignore - ignore TCP flags