Filter
Top Products
Figure 3. FXS/DPO Menu Tree
1. Configuration
2. Provisioning
3. Status
4. Test
1. Digital Network Loopback
2. 1004 Hz Tone Test
2. 2-Wire Termination
1. 600 + 2.16
2. 900 + 2.16
Enter Value (-7.0...+9.0)
3. Transmit TLP
1. Loop Start
3. TR08 Single Party
2. Ground Start
5. TR08 Auto
4. TR08 Universal VG
6. PLAR D4
8. Tandem
7. PLAR D3
10. FX Ringdown
9. DPO
1. Disabled
2. Enabled
1. Inactive
2. Active
3. Network Hook Test
1. No Test
2. On-Hook
3. Off-Hook
4. Customer Ringing Test
1. No Test
2. Ringing
5. Trunk Processing
1. No Test
3. To Loop
2. To Network
4. To Loop and Network
Unit Name
Part Number
CLEI Code
Software Revision
1. Mode
4. Receive TLP
7. NBOC
Enter Value (0...126)
6. On-Hook Messaging
3. 2-Wire Termination
4. Transmit TLP
6. Trunk Processing
1. Circuit
2. Mode
5. Receive TLP
9. Signal Bits Tx/Rx
10. Digital Test
8. NBOC
7. On-Hook Messaging
1. Busy in CFA
2. Idle in CFA
8. Ringback Tone Generation
(2)
8. Tandem
(1)
1. Disabled
2. Enabled
3. Tandem Battery
4. Dial Tone Generation
6. Forward Disconnect
1. Conversion Mode
2. Supervision
5. Ringback Tone Generation
8. DNIS Delay
(3)
7. DNIS Protocol
1. Tandem Inactive
2. Loop Start
3. Ground Start
1. Immediate Start
2. Wink Start
1. Normal Battery
2. Reverse Battery
1. Disabled
2. Enabled
1. Disabled
2. Enabled
1. Disabled
2. DNIS Enabled
3. DNIS Enabled - No Answer
3. 1.5 seconds
4. 2.0 seconds
6. 3.0 seconds
1. 0.5 seconds
2. 1.0 seconds
5. 2.5 seconds
8. 4.0 seconds
7. 3.5 seconds
3. 750 msec
4. 1 second
1. 250 msec
2. 500 msec
5. 2 seconds
(1) Only appears if Tandem Mode is selected.
(2) Only appears if PLAR D3, PLAR D4, or FX Ringdown Mode is selected.
(3) Only appears if DNIS Protocol is enabled.
11. TO w/SC
Enter Value (-9.0...+0.0)