Filter
Top Products
961220010L2-5, Issue 361220010L2-5C
To conduct a terminal session, connect a VT100 or
compatible test set to the OCU-R via the front panel
DB-9 connector, then press the space bar three times
to initiate the session. The Main Menu will appear,
as illustrated in Figure 9.
The Main Menu provides access to detailed
performance and configuration information.
A Terminal Modes Menu is available for configuring
the craft interface for a manual terminal update or a
real-time terminal update. Figure 10 shows the
Terminal Modes Menu.
NOTE
Real-time terminal update is recommended for
normal terminal operation unless screens are to
be captured or logged to a print file.
Figure 9. Main Menu Screen
CIRCUIT ID:IDSL Test Unit 07/25/00 02:14:40
Adtran IDSL Main Menu
1. Status
2. Loopbacks
3. Performance Monitoring
4. Event Log
5. Set Circuit ID
6. Set Date and Time
7. Adtran Information
8. Terminal Modes
Selection:
Figure 10. Terminal Modes Menu Screen
CIRCUIT ID:IDSL Test Unit 07/25/00 02:39:56
TERMINAL MODES MENU
MANUAL UPDATE MODE:
* You can print or log screens
* No text is highlighted
* “Ctrl+R to Update” appears at the top of each screen, reminding
you to press both the ‘Ctrl’ and ‘R’ keys to update the screen
* There is a delay between screen changes & updates
* After 30 min. of no interaction, a new baud rate search is begun
* Ignores input until screen is finished printing
REAL-TIME UPDATE MODE:
* Faster of the two modes
* You cannot print screens to a log file
* Highlighting is enabled
* Recommended for daily operation
Press <SPACEBAR> to toggle update modes