Advantech 5000 Series Network Card User Manual


 
Installation Guideline
DIN Rail Mounting
The system can also be secured to the cabinet by using mounting rails.
If you mount the system on a rail, you should also consider using end
brackets on each end of the rail. The end brackets help keep the system
from sliding horizontally along the rail. This helps minimize the
possibility of accidentally pulling the wiring loose. If you examine the
bottom of the system, you will notice two small retainingclips. To secure
the system to a DIN rail, place the system onto the rail and gently push
up on the retaining clips. The clips lock the system on the rail. To
remove the system, pull down on the retaining clips, lift up on the base
slightly, and pull it away from the rail.
Figure 2-5 ADAM-5000Rail mounting
2-8 ADAM-5000