Filter
Top Products
Quick Start Example
Default Factory Settings
Baud rate: 9600
Bits/sec. Address: 01
(hexadecimal)
The basic hook-up for system configuration is show below:
13-CHANNEL RTD INPUT
17-CHANNEL T/C
INPUT
18-CHANNEL ANALOG
INPUT
16-CHANNEL DIGITAL INPUT
14-CHANNEL ANALOG
OUTPUT
16-CHANNEL RELAY OUTPUT
18-CHANNEL RELAY OUTPUT
16-CHANNEL DIGITAL OUTPUT
Figure A-2 ADAM-5000 system hook-up and configuration
The following items are required to configure an ADAM-5000
system: a personal computer with RS-232 port (baud rate sent to
9600) and the ADAM utility software.
Configuration with the ADAM Utility software
The easiest way to configure the ADAM system is by using the
ADAM utility software. The easy-to-use, menu driven software
will guide you through every step of the configuration process.
(See Chapter 5, Utility Software).
A-6 ADAM-5000