Filter
Top Products
AIMB-210 User Manual 44
! Onboard Serial port 4 [4E0/IRQ11]
This item allows user to adjust serial port 4 of address and IRQ.
! Onboard Serial port 5 [4F8/IRQ10]
This item allows user to adjust serial port 4 of address and IRQ.
! Onboard Serial port 6 [4E8/IRQ11]
This item allows user to adjust serial port 4 of address and IRQ.
3.2.6 USB Device Setting
! USB 1.0 Controller
Select.Enabled. if your system contains a Universal Serial Bus (USB) controller
and you have USB peripherals. The choices are "Enabled" and "Disabled".
! USB 2.0 Controller
This entry is used to disable/enable the USB 2.0 controller only. The BIOS itself
may or may not have high-speed USB support. If the BIOS has high speed USB
support built in, the support will automatically turn on when a high speed device
is attached. The choices are "Enabled" or "Disabled".
! USB Operation Mode
Set the USB 2.0 controller to Hi Speed (480 Mbps) or Full Speed (12 Mbps).
! USB Keyboard / Mouse Function
Select “Enabled” if you plan to use a USB keyboard/Mouse. The choices are
"Enabled" and "Disabled".
! USB Storage Function
Select "Enabled" if you plan to use an external USB storage device to boot sys-
tem under DOS mode. The choices are "Enabled" and "Disabled".