Filter
Top Products
Chapter 5 CPC-2520 VGA/LCD Control Board 63
5.4 Jumpers and connectors
On-board connectors link to external devices such as hard disk
drives, keyboards, or floppy drives, etc. In addition, the board has
jumpers for configuring your board for specific applications.
The table below lists the function of each of the board's jumpers
and connectors. Later sections in this chapter give detailed
information on each jumper setting, and gives instructions for
connecting external devices to your card.
Table 5-1: Jumpers and connectors
Number Function
SW1 LCD panel type setting
CN1 Reserved for VGA testing
CN2 LCD display connector
CN3 VGA display connector
CN4 PCI bus