Filter
Top Products
Chapter 1 Hardware Configuration 3
1.2 Specifications
1.2.1 Standard SBC functions
• CPU: Intel
®
Socket 370 Pentium
®
III Coppermine CPU up to 700
MHz, Intel
®
Socket 370 Celeron
TM
CPU up to 566 MHz
• BIOS: Award BIOS (Intel
®
FWH 4 Mb)
• Chipset: Intel
®
810
• System bus frequency: 100/66 MHz
• Bus interface: 32-bit, 33 MHz, PICMG 2.0 compliant
• L2 cache: CPU built-in 256 KB (Pentium
®
III) or 128 KB
(Celeron
™
) on die
• RAM: Two 168-pin DIMM sockets support up to 512 MB SDRAM
at 100 MHz, unbuffered
• EIDE interface: Handles up to 4 IDE HDDs or other IDE devices.
Supports PIO mode 4 and Ultra DMA/33, Ultra DMA/66 mode (via
J3 connector)
• FDD interface: Supports up to two floppy disk drives (via J3
connector)
• Parallel port: Configured to LPT1, LPT2, LPT3 or disabled.
Supports multi-mode parallel port (SPP/ECP/EPP)
• Serial ports: Two RS-232 ports with 16C550 UARTs. MIC-3365
and MIC-3365D provides one serial port, and MIC-3365F provides
two serial ports on the front panel
• PCI Watchdog timer (MIC-3365D only): Can generate a system
reset. Time interval is from 1 to 63 seconds, jumperless with run-
time setup. To program the watchdog timer, refer to Appendix A,
"Programming the Watchdog Timer".
• Ethernet: Dual Intel
®
82559 Fast Ethernet Controller Chips, 10/
100 Base-TX with RJ-45 connectors
• Keyboard/mouse connector: One 6-pin mini-DIN connector on the
front panel