Filter
Top Products
41 Chapter 3
3.6.3.2 USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB) con-
troller and you have a USB keyboard. The choice: Enabled, Disabled.
3.6.4 PWRON After PWR-Fail
This field lets you to determine the state that your computer returns after
a power failure. If sets to Off, the PC will not boot after a power failure.
If sets to On, the PC will restart after a power failure. If sets to Auto, the
PC will go back to the previous state before a power failure occurred. For
instance, if the PC is power-on when power system fails, the PC will
restart when power system is working again. If the PC is power-ff when
power system fails, the PC will not boot when power system is working
again. The Choice: Off, On, Auto.
3.7 Power Management Setup
The power management setup controls the CPU card’s “green” features to
save power. The following screen shows the manufacturer’s defaults:
3.7.1 Power-supply Type
This item allows you to select power supply type-- AT or ATX
3.7.2 Power Management
Figure 3.8: Power management setup screen