Filter
Top Products
PCA-6185 User’s Manual 48
Chapter 4 PCI SVGA Setup
4.1 Before you begin
To facilitate the installation of the enhanced display device drivers and
utility software, you should read the instructions in this chapter carefully
before you attempt installation. The enhanced display drivers for the
PCA-6185 board are located on the software installation CD. You must
install the drivers and utility software by using the supplied SETUP pro-
gram for DOS drivers.
Note: The files on the software installation CD are com-
pressed. Do not attempt to install the drivers by
copying the files manually. You must use the sup-
plied SETUP program to install the drivers.
Before you begin, it is important to note that most display drivers need to
have the relevant software application already installed in the system
prior to installing the enhanced display drivers. In addition, many of the
installation procedures assume that you are familiar with both the rele-
vant software applications and operating system commands. Review the
relevant operating system commands and the pertinent sections of your
application software’s user’s manual before performing the installation.
4.2 Features
• Built-in ATI 3D RAGE XL multimedia accelerator
• Superior 3D performance achieved through a floating print setup
engine rated at 1.2 million triangles/sec
• Integrated 230 MHz DAC allows 85 Hz refresh at 1600 x 1200 resolu-
tion
• Complete local language support
• Power management for full VESA DPMS and EPA Energy Star com-
pliance
• User-friendly installation for Windows 2000 and Windows NT
• 8 MB SDRAM frame buffer interface with 800 MB/sec bus bandwidth