Filter
Top Products
12 TPC-1260 User's Manual
Step 1: Unpack the TPC-1260 package. Please check the packing
list at the beginning of this manual.
Figure 2-1 Unpack the package
Step 2a: Install a 2.5" HDD containing certain operating system (and
even application programs) on the TPC-1260. Please refer to section
1.2.3 for the boot-up sequence.
As shown in the Figure 2-2, align the 2.5” HDD so that its four screw
holes are upward. Usually this would make the HDD PCBA side
upward too. Put the insulating sheet on the HDD. Carefully install the
four vibration-absorbing cushions on the HDD cover. Fasten these
parts together.
Now the HDD subassembly is done. It is self-aligned that the internal
IDE cable can only be connected in correct direction. Connect the IDE
cable to this subassembly and fasten the subassembly to the rear case
of the system.
Cushion
(P/N: 2130201590)
Accesory Box
(P/N: 2110002150)
Gift Box
(P/N: 2110002430)