Filter
Top Products
Chapter 4 Windows CE in the TPC-1260 31
4.3.2 Networking via serial port
The TPC-1260 with built-in Windows CE supports serial connection to
host computers. The host computer must install the Microsoft
ActiveSync service offered by Microsoft. Use a null modem cable
bundled with the TPC-1260 to connect the serial ports of the host
computer and the TPC-1260. Then activate ActiveSync service on the
host computer. The host will automatically scan its serial ports and
make a connection.
Step 1: Make sure the Microsoft ActiveSynce service and the
Microsoft embedded Visual Tools are properly installed in
the host PC.
Step 2: Connect the two RS-232 ports of the host PC and the TPC-
1260 by a null modem cable.
Step 3: If users are using the Microsoft eMbedded Visual Tools to
develop Windows CE application runtimes, make sure the
TPC-1260 SDK provided in the TPC-1260 support CD is also
properly installed in the host PC.
Step 4: Click "Start/Programs/Communication/Remote Networking"
Figure 4.3-3 Remote networking