Filter
Top Products
Installation
13
2
Installation
Installation
When you receive your mainframe, first look for any obvious damage that could have occurred during shipment. If there is
damage, notify the carrier and the nearest Agilent Sales Office immediately. Warranty information is printed behind the
cover page of this manual.
Save the shipping carton and packing materials in case the mainframe has to be returned to Agilent Technologies in the
future. If you return the mainframe for service, attach a tag identifying the owner and model number. Also include a brief
description of the problem.
Items Supplied
In addition to this manual, check that the following items are included with the mainframe:
Power Cord Your mainframe was shipped with a power cord for the type of outlet used at your location. Depending
on the option that was ordered, some power cords are shipped without a plug. If the appropriate cord was not included,
refer to the option list in Chapter 1 and contact your nearest Agilent Sales and Service Office to obtain the correct cord.
Your mainframe cannot use a standard power cord. The power cords listed in Chapter 1 have heavier
gauge wire.
Filler Panels Eight filler panels are included with each mainframe. Filler panels are installed in empty module slots.
Serial Cable A 1-meter serial cable that connects to the J1 connector next to the GPIB connector. This is used to
serially connect two mainframes or a mainframe with power supplies that have the serial-link capability on the same GPIB
address.
Keyboard A quick reference card for the optional Agilent 66001A MPS Keyboard is included with the
Reference mainframe.
Card
Manual If applicable, change sheets may be included with this manual. If change sheets are included, make
Change Sheet the corrections to the manual.
Input Power
You can operate your mainframe either from a 87 - 132 Vac or a 174 - 250 Vac single phase ac power source. Refer to
Chapter 1 for complete input power specifications and requirements.
Line Voltage Conversion
The mainframe contains no line voltage switches. Refer to the module User’s Guide for information on changing the line
voltage.