Filter
Top Products
Host RJ-11 IP Gateway User Guide, version 10
Installation
FIGURE 6. Port Utility
A. Double-click on the [Click to Assign] for the discovered device (if an IP addess is listed in that
column, double-click on the IP address if you need to change it).
B. Type in an IP address. It’s recomended that you use 192.168.1.3.
C. Press Enter to save the address.
A. Click on Add Unlisted Port Server.
FIGURE 7. Add Unlitsed Port Server
B. Click on Assign IP Address.
C. Enter the MAC address found on a sticker beside the Ethernet port on the Ethernet Address
line.
D. Type in the desired IP Address as noted in step 3 above.
E. Click Assign IP Address.
3.
Configure a temporary IP address for configuring the Host RJ-11 IP Gateway.
optional
If the Host RJ-11 IP Gateway is not displayed in step 2, you will need to manually add the device.