Filter
Top Products
Wireless Broadband Router User Manual
14
Check/Renew IP Address under Windows 98/ME
The following steps help you verify if your network adapter gets an
IP address within the DHCP IP pool range (192.168.1.100 ~
192.168.1.150 by default) of the router. If not, you may need to
renew the IP information.
Step 1 From the Start menu, click Run to open the Run dialog
box.
Step 2 Enter winipcfg in the dialog box and then click OK.
Step 3 Select the Ethernet or WLAN adapter from the drop-down
list to show the IP address. If necessary, click Release and
then Renew to get a new IP address.
Click the drop-down
arrow to select your
Ethernet adapter.
For Windows 2000/XP
Step 1 Click on the Start menu, point to Settings and click on
Control Panel.
Step 2 Double-click the Network and Dial-up Connections or
Network Connections icon.
Step 2 Right-click the Local Area Connection icon for your NIC
or wireless adapter and then click Properties.
Step 3 On the General tab, highlight Internet Protocol (TCP/IP)
and then click Properties.
Step 4 Choose one of the methods as required:
Option A: Using DHCP
On the IP Address tab, enable Obtain an IP address
automatically and then click OK.