Filter
Top Products
Wireless Broadband Router User Manual
24
3. Host Name: If required, enter a host name for this router. Some
ISPs only respond to a DHCP request with a valid “Host Name” .
If a host name is not necessary for your ISP/network
environment, just leave it blank.
Figure 4-4 WAN Configuration – General
Part 2. Configuring protocol-specific settings
According to the Protocol selected above, enter the related
parameters.
u DHCP Client
If DHCP Client is your option, no other configuration is needed. You
may just click Apply to end your WAN settings. After the connection
with the ISP is established, the information provided by the ISP will
be displayed in the Status section.
Figure 4-5 WAN Configuration – DHCP Client
u PPPoE Client
Theses parameters are provided by the Internet Service Provider.