41
3.2.1.4 Change Password
You can change the password required to log into the Router’s web configuration utility.
The default password is “admin”. It is suggested to change the administrator’s default
password as soon as you start to use the Router, and store it in a safe place. The
password consists of 0 to 9 alphanumeric characters, and are case sensitive
Parameters Description
Old Password
Enter the current password of the router.
New
Password
Enter the new password.
Reconfirm
Enter the new password again for verification purposes.
Note: If you forget your password, you’ll have to reset the router
to the factory default (the default password is ‘admin’) by pushing
and holding the Reset button on the side of the router for 6
seconds. When both LEDs are blinking simultaneously, the router
has been reset.