Filter
Top Products
42
Static DHCP
Specify the Static DHCP Addresses for your
LAN clients.
Domain Name
Enter the domain name of your LAN interface if
there is one.
Click <Apply Changes> at the bottom of the screen to save the above configurations.
3.1.3 Routing
You can turn off the NAT function of your router by enabling the Static Routing and let the router
forward packets by your routing policy.
Parameter Description
Enable Static Routing Enable/disable the NAT function
Destination LAN IP Enter the IP Address of the destination LAN.
Subnet Mask Enter the Subnet Mask of the destination LAN.
Default Gateway This is the gateway IP Address where packets are sent.
Input the gateway IP Address.
Static Routes From the table, you can check each Static Routing
setting.
Delete Selected If you want to delete a setting, check the ‘select’ box of
the setting you want to delete, then click ‘Delete