Filter
Top Products
12
I. Video Input: Connect the video input terminal to the video output terminal of the
video output device.
Video
Audio Input: Connect the audio input terminal to the audio output terminal of
the video output device.
J.
S-Video INPUT: Connect the Y/C S-Video input terminal to the S-Video output terminal
of the video output device.
S-Video Audio INPUT: Connect the audio input terminal to the audio output terminal
of the video output device.
4.4 Remote Control
1 Standby( ): Press this button to turn off to
standby and turn on from standby.
2 Mute(
): Press this button to quiet the sound
system. Press again to reactivate the
sound system.
3 Number
buttons: Use these buttons to enter
the password.
4
PIP POS. : Press the button to select different
Image Position in PIP Mode.
5
Source: Press this button and use
▲ / ▼
button to select the signal sources. AV, S-Video,
YPbPr 1
,
YPbPr 2
,
VGA or HDMI.
6
Layout: Press this button to pop up Layout
menu.
7
Swap: Press this button to switch the Main
window or Sub window pictures in PIP and
S
plit Screen.
8 VOL +/-
: Press these buttons to
increase or
decrease the volume
.
9
W. Sele: Press this button to select the Main
Window or Sub Window.
10
S. Sele: Press this button to select the sound
output from Main Window or Sub Window.
11
PIP: Press this button to change different
Picture Mode.
12 OK : Press to enter or confirm.
◄ /
► : They are used as ◄ / ► buttons in
the OSD Menu screen.
▲
/ ▼ : They are used as ▲ / ▼ buttons in
the OSD Menu screen.
They also can be used for the selection of the
program when the OSD Menu is not shown on
the screen, but only for the Model with Tuner.
(Continued on next page)