Akai PDP4273M Computer Monitor User Manual


 
5
1. Read all safety instructions and the User Manual before using the product.
2. The safety instructions and User Manual should be maintained in good condition for
future reference.
3. Unplug the power connector before cleaning the product. A wet cloth is sufficient for
the cleaning of the product, never use liquid or spray cleaner for cleaning the product.
4. Always use the accessories recommended by the manufacturer to avoid any risk.
5. When moving the product from an area of low temperature to an area of high
temperature, drops of water may condense on the housing. Do not turn on the
display immediately after moving so as not to cause fire, electric shock or component
damage.
6. Do not install the product on unstable fixtures or stands. The installation of the
product should be conducted in accordance with the instructions and using the
support recommended by the manufacturer.
7. Do not remove the earthing pin on the power plug. The product is supplied with a
three-pin earthing-type power plug, this plug will only fit an earthing-type power
outlet. This is a safety feature, if you are unable to insert the plug into the outlet,
contact an electrician.
8. Avoid overloading the power cord. Using extension cables or the cords of other
appliances may cause fire or electric shock.
9. If any of the following occurs please contact the retailer:
- The power supply or connector fails.
- Liquid sprays or any object drops into the Display.
- The Display is exposed to rain or other moisture.
- The Display is dropped or damaged in any way.
- The performance of the Display changes substantially.
10. A distance of at least 1 meter should be maintained between the product and any
heat source, i.e. radiator, heater, oven, amplifier etc.
11. To avoid the risk of electric shock or component damage, switch off the power before
connecting the PDP to other devices, such as VCR, DVD or PC.
12. The power cable must be replaced when using different voltage from that specified
in the User Manual. For more information, contact your dealer.
13. Operating environment:
Temperature: 5°C~33°C
Humidity: 20% to 85% non-condensing
Atmospheric pressure: 800 to 1100hPa