Allied Telesis AT-AR300 Network Router User Manual


 
28 Release Note
Software Release 2.3.1
C613-10325-00 REV B
Border Gateway Protocol 4 (BGP-4)
The Border Gateway Protocol version 4 (BGP-4) is an external gateway protocol
which allows two routers in different routing domains to exchange routing
information. Software release 2.3.1 supports phase one implementation of
BGPv4 on AR700 Series routers, Rapier Series Layer 3 Switches, and AR800
Series Modular Switching Routers. BGP-4 is not available on AR300 Series
routers.
The available commands are:
ADD BGP AGGREGATE
ADD BGP CONFEDERATIONPEER
ADD BGP IMPORT
ADD BGP NETWORK
ADD BGP PEER
DELETE BGP AGGREGATE
DELETE BGP CONFEDERATIONPEER
DELETE BGP IMPORT
DELETE BGP NETWORK
DELETE BGP PEER
DISABLE BGP DEBUG
DISABLE BGP PEER
ENABLE BGP DEBUG
ENABLE BGP PEER
RESET BGP PEER
SET BGP
SET BGP AGGREGATE
SET BGP IMPORT
SET BGP PEER
SHOW BGP
SHOW BGP AGGREGATE
SHOW BGP CONFEDERATION
SHOW BGP IMPORT
SHOW BGP NETWORK
SHOW BGP PEER
SHOW BGP ROUTE
For more information, see the Border Gateway Protocol version 4 (BGP-4) chapter
of your switch or router’s Software Reference. The latest Software Reference
can be downloaded from the support site at www.alliedtelesyn.co.nz/
documentation/documentation.html