Filter
Top Products
AT-2911 Series Gigabit Ethernet Network Adapters Installation and User’s Guide
119
Cleaning Fiber Optic Connector Using a Swab
Specially treated swabs (stick cleaners) are available for cleaning inside
connector adapters or hard-to-reach ferrule tips. These swabs, often
referred to as “lint free” or “alcohol free” swabs, are available from many
vendors. Stick cleaners are available in both 2.5 mm and 1.25 mm sizes
for use on SC and MU connectors respectively. See Figure 65.
Note
NEVER use a household cotton swab and/or alcohol to clean a fiber
optic connector. This may leave a residue on the ferrule tip.
Figure 65. Lint-Free and Alcohol-Free Swabs
Note
Do not use compressed air or aerosol air to clean a fiber optic
connector.
To clean a recessed ferrule using a swab, do the following.
1. Insert the swab into the adapter as shown in Figure 64 and rub the
ferrule tip with the swab.
Figure 66. Cleaning a Recessed Ferrule
2. If needed, repeat step 1.