Filter
Top Products
4.6 Advanced (for advance user only)
The ADSL Router supports a host of advanced features. For basic ADSL Router functionality,
the user does not need to utilize these advanced features. The features help with routing,
security, port configuration, and plug and play capability.
4.6.1 UPnP
UPnP NAT and Firewall Traversal allow traffic to pass-thru the ADSL Router for applications
using the UPnP protocol. This feature requires one active DSL connection. In presence of
multiple DSL connections, select the one over which the incoming traffic will be present, for
example the default Internet connection.
To enable UPnP, you must first have a WAN connection configured. Once a WAN connection is
configured, click Advanced and under Advanced, select UPnP. This will bring up the screen
shown in Figure 13. You must enable UPnP and then select which connection will utilize UPnP.
In this case the PPPoA connection is enabled.
Figure 13 (Management IP address)
The apply button will temporarily save this connection. To make the change permanent you need
to click on Save Settings (at the side of the page). At the system commands page, click on Save
All.
- 21 -