Filter
Top Products
13
Appendix A
Electrical Safety and Installation
Requirements
STANDARDS: This product meets the following standards
STANDARDS: This product meets the following standards
!
1 RFI Emission EN55022 Class A
!
2
WARNING: In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
!
3Immunity EN50082-1 1997
!
4 WARNING: This product requires shielded cables to comply with emission and immunity standards. If it is used with
unshielded cables, the user may be required to take measures to correct the interference problem at their own
expense.
Electrical Safety TUV-EN60950, UL1950, CSA 950
Laser EN60825
Warning Class 1 Laser product.
!
5Warning Do not stare into the Laser beam.
At time of installation, the Fiber Optic Lasers comply with FDA Radiation Performance Standard 21CFR Subchapter
J, applicable at date of manufacture.
Use of controls or adjustments of performance or procedures other than those specified herein may result in hazardous
radiation exposure.
SAFETY
!
6 LIGHTNING DANGER
DANGER: DO NOT WORK on equipment or CABLES during periods of LIGHTNING ACTIVITY.
!
7 DO NOT BLOCK AIR VENTS
Power to the hub must be sourced only from the adapter.
USA/CANADA
Use a UL Listed/CSA Certified AC adapter of DC 12V, 500mA.
EUROPE - EU
Use TÜV licensed AC adapter of DC 12V, 500mA.
UK
Use a UK Safety Approved AC adapter of DC 12V, minimum 500mA.
U.S. Federal Communications Commission
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with this instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void your right to
operate this equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.