Filter
Top Products
Configuring the VPN client > Add the IP Security Policy Management snap-in
Page 9 | AlliedWare™ OS How To Note: VPNs with Windows 2000 clients, without NAT-T
Add the IP Security Policy Management snap-in
Note: You need to know the public IP address for the router from your Internet Service
Provider (ISP) for this configuration.
This example assumes that you have already set up your internet connection.
1. On your desktop, select Start > Run and enter the following command:
mmc
This opens the Console window, as shown in the following figure.
2. Select Console Root > Add/Remove Snap-In.
This opens the Add/Remove Snap-in window, as shown in the following figure.