Filter
Top Products
45
2.11 System Setup
System Setup page provides management information for the switch. The page shown below can be
activated by clicking on the System Setup menu under the System section.
The following parameters can be configured / displayed:
Model Name – the model name of this switch (read-only)
Chip Version – the switch chipset version (read-only)
Firmware Version – the current version running on the switch (read-only)
DHCP Client – DHCP client status
IP Address – the IP address to manage this switch.
Subnet mask – the network mask to identify the sub-network address
Gateway – the IP address of the default gateway
MAC address – the MAC address for the configuration port interface (read-only)
ARL Aging – the aging time of dynamic ARL entry in address table