Filter
Top Products
7
1.2 Configuration Functions for the Switch
After the login is successfully validated, the switch’s home page will display. The left part of the page
provides function menu options (shown as below). Select one of these options to activate to the
individual configuration page.
The function menu contains two parts: Switch for setting up the switch functions and System for
maintaining system parameters.
Switch functions include:
Port Status – shows port link status and configuration parameters
Port Statistics – shows packet statistics for each port
Port-based VLAN – to setup the port-based VLAN
802.1Q VLAN – to configure the tag-based VLAN
Trunk – to implement port aggregation features
Mirror – to implement port mirroring features
QOS – to configure Quality of Service features
Rate & Storm Control – to configure traffic limit settings and suppress broadcast storms
System functions include:
System Setup – configure system information (such as IP address, etc.)
User Management – maintain the login information that enables access to the switch
Reboot System – reboot the switch without re-writing default configuration
Reset System – reboot the switch after re-writing default configuration
Logout – log off the current admin user